Central unit with 1x BUS, 1x MODBUS - CU3-10M

DESCRIPTION

• CU3-10M is one of the basic system control units of iNELS BUS installations.
• The unit can work independently, as an autonomous project, or it can be controlled by the IP-MASTER as part of a larger project.
• The unit is equipped with one BUS to switch it is possible to connect up to 32 elements from the iNELS BUS portfolio.
• The current load of one line is max. 1 A. BPS3-01M with 3 A can be used in the case of a connected device with more than 1 A.
• The CU3-10M system unit is equipped with one Modbus system bus. The Modbus system bus allows control of Modbus thermostat and Air condition units (RS-485).
• The RJ45 100 Mbps Ethernet connector is used for direct communication with the cloud for mobile app control or for communication with the superior unit within the iNELS IP topology.
• Configuration takes place in the iNELS3 Designer & Manager software (iDM3). Through iDM3 it is possible to update the firmware of central units and bus connected peripheral units.
• The central unit is implemented with MQTT protocol for 3rd party communication. 
• The unit is powered by 27 V DC from iNELS power supply. 
• System units CU3-10M in 1-MODULE design are designed for mounting into a switchboard on DIN rail EN60715.

 

Downloads

• Datasheet CU3-10M

  Format: pdf | Size : 125 kB | 28. 04. 2024