Switch unit with a temperature sensor - RFSTI-11G

DESCRIPTION

Function:
Interal – measures temperature by internal sensor and sends it to the system unit.
Exteral – measures temperature by external sensor and sends it to the system unit. 
Combi – measure room temperature by internal sensor and monitors critical floor temperature by external sensor.

• Manual control of temperature directly using buttons on the unit, where by pressing the upper button, a command is sent for automatic switching to the mode Party (preset temperature), and a press of the lower button sends a signal for switching to energy-saving mode (the change in temperature applies until the next set change of the heating program).
• These can be combined with system units: smart RF box eLAN-RF, wireless controller RFTC-50/G, touch unit RF Touch.
• Setting the heat/cool function, hysteresis and off set is performed in the system unit or application.
• It measures temperature in a range of -20 - 50 °C and sends it to the system unit in regular 5-min. intervals. It sends a signal upon sudden temperature change within 1 min.
• Color combination of heating unit in design of frames LOGUS 90 (plastic, glass, wood, metal, stone).

TECHNICAL PARAMETERS

• Power supply AC 110 – 230 V.
• Temperature range: -20°C až +50°C.
• Output contact: 1x switching 8 A (AgSnO2, 2 000 VA/AC1).
• Range up to 160 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20.
• Communication frequency (868MHz, 866MHz, 916MHz, 922MHz) with bidirectional protocol RFIO or RFIO2.
• RFIO2 is an innovative iNELS RF Control wireless communication protocol, which brings you greater stability and eliminates signal collision between individual components.
• Switch design (design LOGUS90) offers mounting in an installation box.
• External sensor TC (0 - +70 °C) or TZ (-40 - +125 °C) for length of 0.11 m, 3 m, 6 m, 12 m.